Electric Kingfisher Kayak

Growing Marijuana as a Newbie

2011-07-30T09:02:00.001-07:00

I have been busy tending to my new venture growing marijuana for the first time.

My 93 year old mother has an Oregon Medical Marijuana License. I am her caregiver allowed to grow plants for her use. I missed the whole drug culture like I missed being a baby boomer by the skin of my teeth. I never got into smoking pot let alone trying to grow it.

I started with donated seedlings that I kept in the green house until June when our weather stabilized into what we call our air-conditioned summer. I got a hold of a book and read on the Internet how to take care of marijuana plants. Needless to say, much of what you read is written by not only marijuana educated folk, but many are high when they write their information. I warn you that if you get on YouTube to find out what someone has to say about the culture of marijuana, you will find the guy hard to listen to. Since, I am not a user, the jargon and the presentation seems like listening to someone who has a disconnect with reality of how to present information that can be given credibility. It is difficult to get what you are certain is actually sound advice. I admit that I am biased about knowledge being dispersed by someone under the influence. Much of what you find is for those growing inside a facility with special lights and forced maturity the desired outcome. Those growers want a crop to produce in 75 days. I want something to produce in a season; which is 3-4 months time.

I have been a passionate gardener for years not understanding why all the special care would be needed for a weed. I am very concerned with mold as advised, but how concerned should I be is the question. My husband put up a support system so that I could pull green house plastic up and over the plants if rain comes, or it gets foggy here up river. I am not even sure all this is necessary. We will find out in September what we have done right or wrong. The plants look fine to me, but whether they are male or female has escaped my ability to discern. I have to wait for something to let me know. I think I will know when this something appears. I have pictures of males in all their glory. Anyway, let's hope I can, because I hear that you need to yank up and throw away the male plants. I have a concern that all my plants may be male and that be just wrong on so many levels.

The new bed I created for the pot plants was amended before planting, but at first you could tell that there was not enough green to the color of the leaf. We added bone meal to help with this problem and it worked. The two plants I put into good potting soil in 5 gallon containers did much better. All the plants look pretty much the same at this point in time. I do have one plant that refused to grow. Can you imagine that! That little bugger just sits there very much alive and very much stunted. I know I should yank that out of the bed, but I keep hoping he will find the will to live like his other family does reaching for the sky.

I have a problem with killing most anything so the ruthlessness of yanking out those males will hurt my gardening heart. I will do it as everything I read tells me to do this, but it won't be easy. Males should have some value just for thriving like they should. They have been good boys.

I know those of you that might be reading this that know just how to grow their pot, find me pretty amazingly stupid about the process, but I will learn. Maybe if I would smoke some every once in awhile, I wouldn't be so worried about the process and find a zen feeling just rustling the leaves smelling the possibilities of mom having some fine weed to get that back pain under control. I have found that my dogs will take a nibble as they walk by. Are my dogs becoming stoners?

I will keep you updated with my failures and successes of growing my first crop of marijuana.

2010 Salmon season opening

2010-05-24T11:02:00.000-07:00

The 2010 salmon season has begun. This is a favorite activity for many fishermen/gals on the southern oregon coast and it provides some of the most unforgettable fishing thrills to be had. The season runs until September. If we are lucky we will get another 4-10 days of fishing in October in what we call the 'Trophy Season'. By then the fish are fattened up and ready to head up the river to spawn and they are BIG. So we are now getting the boat and gear ready for salmon action.

Fishing the ocean in june-july can be challenging as the weather is variable and the ocean can get rough. It is common to have swells at 8-9 feet with wind waves at 3 ft, making for a bumpy ride and green passengers. Fighting and netting a fish under those conditions can be very challenging, and then there is the ride home at the end of the day. The ocean is often so rough the Coast Guard will not allow small boats (under 26 ft) to leave port. August and Sept are much nicer with light winds and larger fish. But Lynnette and I are not bothered with motion sickness and we will be out on the water if the c/g allows it. Any day with waves in the single digits is a good day for us.

It seems that salt water and boats are not made for each other. The salt gets into everything and corrodes all metal. Electrical wiring is especially vulnerable with the electrical potential on the wires making the corrosive power of the salt even more effective at creating trouble. All of the splices and connections have to be cleaned and many repaired each season. I have spent several days with my head in the bilges insuring that we will not have electrical problems at sea. Today the Down-riggers will get checked out, completing the electrical work.

/div>

Another hazard in the ocean is sea lions. These 400-800 lb critters love salmon and will eat several at a meal. They are about as smart as a dog, and the rascals will quickly learn which boats catch the more fish, and follow them. They also know that a salmon hooked up to a fisherman is far easier to catch than a free one, and that a bent rod and a landing net means---LUNCH. They can quickly cut a fish in half and do so right at the fish gill plate, leaving the head for the fisherman and the rest of the fish is their meal. Above is a pic of a 30+ lb salmon reduced to a couple of pounds of bone by a sea lion. In the last 9 years I have hooked up to 3 sea lions, with the lion getting hooked while stealing a fish, my bait and one even hit a bottom fishing jig. When you get a hook into one of those things it is pretty obvious you aren't gonna want to land the thing. Just break it off soon and hope you have enough line left to continue fishing for the day.

The southern pacific has a lot of warm water this year and we are hoping that some of it will come up our way bringing with it albacore and other warm water fish. A couple of years ago we had 62 degree water only 12 miles out of port. More typically it is at 30-40 miles in August-September. Albacore are the fastest fish in the pacific, having been clocked at 60+ MPH. They travel in schools usually with porpoise nearby, looking for bait fish. These fish cruise at 15-25 MPH all day long. We troll for them at about 10 knots with at least 4 lines in the water. The fish see the prop-wash of the boat followed by the lures and assume it is a school of bait fish. We commonly have 3-4 fish on, which is a pretty busy time for 2 fishermen. The fish are very fast and do not give up easily. My daughter/fishing partner has given me her fishing rod only 2 times in 30 years of fishing together. The last time was when she had an albacore on and was just too tired to land it. A good day fishing 'Albys' will wear out anyone. Above is a pic of an average alby;

So there are some good days ahead. Looking back on last years season there is one fish that stands out to me. I was fishing in the Chetco River estuary out of my electric powered kayak, trolling a 'plug cut ' herring for salmon. The boat is shown above. Most other boats were trolling with anchovies and were not doing well. The previous day I had brought home a 20+ lb fish and smoked it. Today I was looking for a big fish, just to see if I could get it in, with the intention of releasing it. The Brookings boat harbor is in the Chetco river with a levee isolating it from the rivers current. Motoring out the harbor puts you in the river about 1/2 mi from the ocean. On the south side is a coast guard dock that is used primarily by sea lions for sleeping and watching the fishermen, looking for lunch.

I was slow trolling a plug cut herring in a riff where the downstream river current met the still water of the harbor. The fish-finder indicated fish there but the boats using anchovies were not getting any action. The electric kayak is very quiet and it may have been the difference between spooking the fish and hooking up to one. In any case the rod went down and I set the hook. It felt like a large fish as it didn't even move for a few seconds after the hook set, but then slowly swam up stream. The pull on the line was steady, much like the pull of a freight train. It towed the boat up river for a couple of hundred yards and settled into a deep hole. I stayed over the fish putting as much pressure on it as the line would tolerate. Across the river was a couple of sea lions sunning on 'their dock' looking half asleep.This fish was big enough to feed both of them, and I wondered how long it would take for them to notice my struggle with this fish. After several minutes the fish moved out of the hole and down stream toward a platform where folks often fish for crab using small throw-nets with bait attached. It moved back and forth in front of the crabbing area and it looked like it would end up fouled in a crab line. Now the goal had changed from landing a large salmon to just getting a look at this fish. I felt there was no hope of lifting this monster out of the water and into the boat, and I didn't want to kill it and tow it ashore as it would be a female and it was more important that it complete its spawning cycle. But I really did want to see her.

The fish now headed down river toward the breakwater and the ocean. The swells were too big that day to safely deal with the fish there and my chances of seeing this fish were rapidly fading. A small fishing boat appeared at the harbor entrance heading down river and out to sea. As it approached I waved and shouted 'fish on' pointing to the bent over rod and the fish location. Still the boat did not change course and was moving between me and the fish. More shouting and waving had no effect. I shoved my rod tip as far underwater as I could hoping to get my line deep enough to clear the boats propeller. As the boat crossed my line I felt the fish break free. I yelled a few comments about the skippers eyesight and ancestry while reeling in the slack line. I was surprised to find that I still had my hooks, and they must have pulled out of the fish- the line was not cut. I checked the time and was surprised to find the fish had been on for only half an hour. I was arm-sore and ready to call it a day.

I also had a new appreciation for the little kayaks boat control qualities. The boat is controlled with ones feet. I could steer it, turn the motor off-on and select forward and reverse using only my feet. There was never a time when the boat was not in the best possible position to deal with the fish. Given more room to work the fish I am sure it could have been brought alongside and taken or released. Sadly I never got a look at the fish, but I have caught several salmon over 40 pounds and this one was as big as any I have had a hook into. I am sure as time goes on the size of it will only grow in my recalling that contest. It was a big one.

Two Person Electric Fishing Kayak

2009-02-04T10:19:00.001-08:00

This information is a reply that I made to an interested person that asked a question from my website:

The boat is coming along nicely. I took the proto-type down to the San Fran Delta this summer for some bass fishing and was very pleased with it. You are right, it is a far better boat for a person of your size. A number of small changes have been made to make is easier to build, improve fit and so on. The plans and manual are being updated.

I put a camera mount on the boat and will be making some videos of this seasons steel head fishing on the Chetco river. They will be put on Utube as they are completed. You can see them by going to Youtube and searching for ( videos-sports-kingfisher electric). I have one there now that is titled Searching for Dead Fred that has the 12 foot boat in it. Check it out.

I will check out the completed documentation by building another boat from it. I plan to make a video of that effort so that folks with no building experience can have a clear view of what the job will be like. It will probably be at least one disc long, possibly 2, so that is going to take some time to put together. The plans/manual will be available first, probably in the next 2-3 months. Here are some pics of the proto-type boat.

In the first picture, I have put a 1000 watt Honda motor generator in the back and a battery charger. The M/G has the ability to change its motor speed according to power demand. So if the electric motor is not drawing battery power, the Honda just idles along quietly. At full electric power the Honda is running at half power and the battery remains fully charged. When I start fishing, the Honda is shut down and I have a fully charged battery to work with. The m/g will run all day on a tank of fuel, about 1/2 gallon. This greatly extends the range of the boat, but is just experimental for now. I think it is the first hybrid electric kayak.

In the pictures, the boat is set up for salmon fishing on the river. Sadly the fish/game folks closed the river this year so I didn't have a chance to get into some larger fish. But you can see there is plenty of room in the back seat area for cooler and tackle.

Ready to go fishing. The boat is loaded into my P/U just as you see it with the cart wheels resting on the tail gate and tied in. When I get to the river it just slides off and is towed to the water. The strap securing the cart is released and the cart is left in the truck. The pipe on the right side (behind the seat) is the bilge pump outlet and camera mount. The font of the boat is clear of hardware to make fishing easier.

Thanks for your interest. Keep an eye on Youtube and the website for progress on this boat. It is a ton of fun to operate.

Needles and knives

2008-04-03T08:30:00.000-07:00

Back in the days when the Vikings were the terror of Europe the folks that came in contact with them noticed that the Viking men often had hands that were unable to be opened completely. It was thought then that the cause was all those hours pulling on an oar in their boats. Their claw-like hands became known as Vikings Disease.

Hundreds of years later a fellow in France named Dupuytren discovered the reason for the limited mobility of the fingers was caused by scaring in the hands near the tendons that eventually involved the tendon, thus limiting the fingers travel. He developed an operation that freed the tendon from the scar tissue, thus restoring mobility to the affected finger. The disease was dubbed 'Dupuytrens Disease'.

The fingers most likely to be a problem is the ring finger and sometimes the little finger. Nodules can be seen in the palm of the hand on the tendon that serves the finger. The tendency for this condition is now known to be genetically passed on, most often occurring in men. The origin of the disease is still thought to be those Viking sailors, with the most affected populations being those that had contact with them. Apparently there is a Viking sailor in my family tree (or the nearby bushes) as most of the male members in my family are afflicted with this problem.

The disorder is progressive and over time the finger can curl to the point of being unable to open at all. Its progression makes little things like washing ones hands or face very difficult. Fishing your car keys out of your pocket becomes a two handed exercise, pushing the keys up with one hand and snagging them with the forefinger of the other. Tying a lure on the end of my line is darn near impossible, especially on a cold morning. So it was time to consider what to do about it.

There are presently two methods of correcting the problem. The 'standard' procedure in the US is to fillet the skin near the affected tendon and expose the underlying fascia, a membrane covering the tendons. This is lifted and the scar tissue is cut from the tendon and removed. The hand is then sewed up and the patient sent home to recover. The work is done in a hospital operating room under general anesthesia with several attending persons. Recovery time is several weeks and due to the local trauma of the operation, it is a one-time procedure.

About 30 years ago a doctor in Paris developed a procedure that uses a needle. The needle is inserted under the skin/fascia and moving it laterally along the tendon, the surgeon cuts away the connecting scar tissue around the tendon. Several insertions are made along the length of the tendon until it is cut free and mobility is restored to the finger. This is an out-patient procedure that is performed under a local anesthetic. Upon completion of the procedure the patient can observe the restored mobility of the finger and is sent home with a bandage on their hand. No further visits to the doctor are usually required for follow up treatment.

So what are the differences in the results of these two types of treatments? I searched the web for info and found little to hang my hat on. The disease is not cured by either operation, and it is possible (likely?) that the scar tissue under the fascia will continue to develop until the tendon is again involved, and mobility of the finger is reduced. How long will that take? I could find no answers, perhaps years, perhaps months. Both operations involve risk of infection, nerve damage, skin trauma that requires grafting and so on.

The Needle procedure leaves far less scaring in the hand and it can usually be repeated if necessary. The procedure is also far less invasive and recovery time is less. Being an outpatient is far more attractive than 'going under the knife', especially at the medical facilities we have available up here in So Oregon. So I searched the web for doctors that use the Needle procedure (it is abbreviated - Dupuytrens N.A.) To my astonishment, there are only a few doctors in the US that are trained to use this procedure. You can find a listing of them on the web under Dupuytrens NA . We had a choice of Dr Kline in Boise ID or a doctor near San Fransisco CA. You can't get to Boise from here so I opted for Dr. K Denkler in Larkspur CA.

The procedure was much like going to the dentist. The needle used for the local anesthetic was the worse part of the procedure and I had both hands done in about 1 hour. During the procedure we could talk about kayaks, fishing in Alaska and even Dr stuff, and in the end I could enjoy the mobility of the ring finger on both hands. That was 2 days ago. Today the needle punctures are closed over and there is no pain at all. I will keep my hands clean and bandaged for a few days, and see if I can stay away from strenuous activity. This is the first time in a while that I can type using more than 3-4 fingers and it is a pleasure. Fishing will be even better.

I am not a medical guy and don't even take an aspirin unless I am in serious pain. So medical things are not all that interesting to me. I have found that a positive attitude, healthy food and activity and reliance on my immune system for 70 years has worked pretty well. Of course there are times when intervention is a must, and this was one of them. So I offer this experience in hopes that it will be helpfull to others with this disease. Please do not take it as a recommendation for you. Learn all you can about your condition and then make an informed decision.

Building an Electric Fishing Kayak

2008-03-26T15:09:00.000-07:00

Build your KF-10 with confidence

The KF10 is offered as a kit boat with all parts available except the skin and finsh material. The skin panels (4 x 8 ft) are too large to package and ship. We have left these for the builder to purchase locally. The frame of the boat is first constructed with provisions for installation of all parts completed. then the skin is then placed on the frame. The skin panels are designed so that precise cutting of the material is avoided, and ordinary tools and skills give good results. The skin is then covered with 4 oz. fiber lass for additional strength. Finally the motor and electrics are installed to complete the job.

The Construction/Operation and Maintenance manual provides over 100 pages of text, pictures and drawings of all of the parts that make up the boat. Schematics and assembly drawings of electrical assemblies are provided so you can fabricate these, or you can purchase them ready to install. The critical parts of the frame are full sized drawings and are easily transferred to wood making the construction of the frame easy and accurate. Step by step instructions are provided so that builders can avoid most of the pitfalls boat builders face.

The Motor Control Unit is not a kit, but a component that must be ordered from Kingfisher Electric Boats.

Building Options

Option 1 -DIY (least expensive)

Purchase the Manual and Motor Controller Unit. Find, fabricate or scrounge all of the material and parts called for in the manual. Assemble the boat from these. The time required will vary depending upon your gathering skills, but figure around 100 + hours.

Option 2 (less expensive)

Purchase parts and kits in the table below and assemble smaller assemblies as instructed in the manual. Build the boat. Time required will be many hours but less than option 1. See Table 2 below.

Option 3 (a little more money, a lot less time)

Order kits in the following table. Notice the electrical kit, modified motor, control panel and steering hardware are assembled and either installed (Frame 2 pedal assembly) or ready to install. All are tested and insure a trouble-free boat. Build time about 70 hours. See Table 3 below.

Option 4 (Bend the Budget - fastest way)

The KF10 is available as a completely constructed boat. It and the manual is crated and shipped to your home ready to mount the included motor. Buy yourself a PFD, a paddle and a battery to power the boat. Get your gear and head for the water. Be sure to have someone read the operation section of the manual to you while traveling to the lake.

Kingfisher Electric Kayak 12 Foot Two-Seater Coming Soon

2008-03-16T11:50:00.000-07:00

We have had many request for a 12 foot two-seater kayak. We decided that what you want is what you get! The kayak is still not finished, but here is a slide show illustrating the progress made so far. We sure would love to hear your comments..sarcastic or not.

New 12 Foot Electric Kayak Coming Soon

2008-02-25T07:53:00.000-08:00

This is Karen reporting for Jim. He has been swamped with finishing up his patent for his Kingfisher Kayak and now he is buried in building another kayak. This time it is the two seater that so many people have requested. He should be done in another week, so look forward to seeing it on his website, Kingfisher Electric Boats.

We also took the time to have official logos made; which you can see above. We also purchased a toy hauler to take the kayaks to boat and sport shows in the Pacific Northwest. We can now eat, sleep and haul in one trailer.

We look forward to attending Mess Abouts with an Oregon based hand-built boating group that Jim met up in Port Townsand, WA at the Wooden Boat Show. In May, they are meeting up at the Lagoon Area just south of us below Crescent City, CA. Jim has always thought he would love to fish those lagoons.

Jim has built into the toy hauler brackets to hold two kayaks up against one wall to take the least amount of space. We even have room for a couple recliners! We think we may need those if we stand on our feet all day at a boat show. After all, we aren't as young as we used to be. We are pulling the trailer with our old trusty diesel truck. They will hear us coming! We could even put a couple of our dogs in the back of the truck for camping situations. I know Mags would love going. She is Jim's shadow and hates to be left behind.

Sadie, our youngest lab, would also enjoy swimming and hiking. She has defective hips, but isn't limping yet. We keep her close so she won't ruin herself, but swimming is the best thing she can do for herself. She swims in our pond all year long and then comes into the house dripping wet! I haven't managed to get her to understand that wet dogs are not welcome. Sometimes, a dog door isn't the best thing.

You might just meet up with us at one of the shows or in a camp ground somewhere within a few hundred miles of Brookings, Oregon. We will be putting large logos on the top sides of the toy hauler and on the back. We will be easy to spot. I will get a schedule onto Jim's website soon.

I also ordered Jim and I white T-shirts with the logo on them. You can spot us easy - we are are a gray haired couple talking kayak talk wearing white t-shirts with a Kingfisher logo. I'll have to hide the shirts while we are at home, or Jim will manage to get fiberglass stuck on the front of his! He has fiberglass on my favorite down vest. It is his vest, but I love to wear it too - and now it just doesn't look so good.

KF-10 kayaks at the Port Townsen Wooden Boat Show

2007-09-25T10:26:00.001-07:00

The Port Townsend anual wooden boat festival is one of the largest and attracts wood boat lovers from all over the country. It was to be the first show we have participated in with the Kingfisher Kayak and we had some concerns about being the 'new weird kayak' of the group, located out in the far end of the show grounds. But the administrative folks there were very generous and gave us a section of dock space for the demo kayak and a nice location near the dock ramp for a static display. The static display was a kayak on its transport cart, with the motor turning the prop at about 120rpm. Few people walked by without stopping for a look. We had brought along a novel to read and literature to pass out.

There were many kinds of boats at the show. At one of the scale there was a Kon-Tiki style raft that was made of lumber they might have found along a railroad track, with a tree stuffed in the middle for shade, and a stump for the pilot to sit on to run the 6 horse merc outboard. Six adventurous souls arrived on this vessel and some were swimming before it was secured to the dock. They brought their sleeping bags and were ready to party the whole 3 day weekend.

At the other end of the scale was a 100 + foot yacht made for the commodore of the San Francisco Yacht club in the 1920s. It looked a lot like the presidential yacht during Nixons term. Also in the fleet were many sailboats, from El Torros to round the world cruisers. All were open to the public and we were eager to get around to all of them for a tour.

There were a number of workshops where wannabe to expert builders could sharpen their skills. The best attended was a shop for kids who diligently built their own model boats of every sort, and with a line attached, launch and retrieve them along the docks and rock banks of the harbor. A creative group of kids caught a jar full of small crabs and had them 'walking the plank' off their boats. Some had sails others were 'motor boats'. Lots of wet kids exercising their imaginations that weekend. Half dozen of them were my great grand kids.

We had the kayaks set up by thursday night and took advantage of my brothers hospitality in the town of Sequim about 25 miles away, sharing pizza and beer, swapping stories. Friday we were at the show at 8am and Lynnette ( my daughter ) listened for a couple of hours while I answered the questions of the many folks that stopped at the static display. She was soon able to handle the questions easily and I could get down to the dock and take the other kayak out for a ride.

Motoring around the harbor had many folks hailing me over to share with them how the boat worked. I seemed to be exactly where I wanted but never used the paddle. The boat is electric powered, and can be completely controlled using only ones feet. This leaves my hands free to accept the beer offered and demonstrate the handling qualities of the boat. I met a lot of very generous folks and enjoyed every visit.

I could also head out of the harbor and paddle/run through the anchorage. The boat moves along easily at 3 1/2 mph and I quickly covered the mile or two over to the Lady Washington tied up at a dock. She is a 3 masted square rigger that travels up and down the west coast, stopping at various ports to be displayed to the public. I have been aboard her in the past, but paddling around her in the kayak offered a very different perspective. From a 10 foot kayak she looks very big, and the top of the main mast is a long way up.

Paddling back I came across a pedal powered boat that was about 17 ft long, and had a chain drive from a bicycle type crank to a gearcase which drove the prop. The rudder was connected to a small handle for steerage and the pilot was in a semi-reclining position. The pilot was an athletic looking fellow wearing shorts and a light shirt, ready to sweat when speed was called for. I had a video camera so asked him for a demo of the craft, and he was glad to show me his stuff. I found it difficult to estimate his speed as we were in open water and there were no nearby fixed objects for a reference. However it went like hell, quickly getting up on a plane and leaving only a little foam in its wake. He ran for only a short distance before the chain came off the sprocket and the boat came to an unplanned stop. He assured me he could remount the chain and he would be OK, so I headed back to the port.

Sunday was more relaxing and Lynnette could take her g-kids for a ride in the KF10. They used all of the 300 lb rating of the boat when she and her daughter jumped in. They felt comfortable enough to paddle/run out of the harbor and head out into the sound to view the sailboat races. On their return they executed a few hard over turns and get the feel for the limits of the boat. Lynnette reported it 'was a ton of fun'.

At the end of 3 days we took stock of the event. We had put a lot of literature in the hands of interested folks, and had no time to leave the display to eat or get to the workshops as we had planned. Lynnette got to page 2 of her novel. The response was very positive. I was especially pleased at the number of builders that came by to look at the craft. Their comments were encouraging and helpful. I am impressed with this community of people. They love what they do and seem to view problems as a just something to be dealt with and an opportunity to find solutions and grow their skills. I heard no complaints and no one cast dispersions on anothers' efforts. The kind of folks that you like to be around. We will be there next year.

We have a Kayaking Forum

2007-08-25T18:17:00.000-07:00

We have been working on our website for the Kingfisher Electric Kayak. Recently we added a forum so that kayak fishermen, kayak builders and kayak dreamers can post to ask questions and to give tips and information to share with others with the same interest: Kingfisher Forum

We have had an incredibly busy summer with getting the kayak business off the ground, creating a website and showing the kayak most weekends at our local port market place. Some of the buyers have actually seen the kayak at the port, gone home and ordered plans. Karen has spent most of the time working at the booth. It takes her until Wednesday to feel rested enough to cook us a good meal! The sun and wind take a toll on her good humor!

We are getting ready to go to Port Townsend, WA for the Wooden Boat Festival taking two kayaks, wearing our newly designed T-shirts with boxes of business cards to pass out. My daughter , Lynnette who you can see on the video is going up with me along with her husband, Jim. We should have a great time meeting new people seeing some incredible boats and enjoying a festive wooden boat show! Karen gets to stay home to watch out for the four dogs and her mom. At least, she doesn't have to work at the port that weekend! LOL

It is sad that since summer, the Kingfisher hasn't been in the water. Port Townsend will be our first summer splash! It is fun to be busy, but the kayak is happier in the water.

Karen has been busy posting questions and answers of questions being sent to us via email to the website so you can learn more about our Kingfisher Kayak. She is teaching eBay at the local college....next will be web design or maybe a class on how to be a webmistress. I'm just happy that I don't have to figure websites out. I can spend productive time building controllers, electrical kits and whatever else is being ordered.

We retired to the Oregon Coast, but have managed to be way busier than ever before. Karen believes that doing website business may be as beneficial as cross-word puzzels to keep our mind intact. I certainly hope so! She often complains of having blisters on her brain from figuring this all out. I wonder if this could be true? LOL

Building Kayaks

2007-08-16T09:24:00.000-07:00

I'm spending time in the workshop building controllers, electrical kits and kayaks to fill current orders before Lynnette shows up today for two weeks of fishing. She comes up from the Bay Area as often as she can get away. It is amazing how tolerant her husband is. I hear he buys more socks when he runs out. He doesn't seem to have learned the art of washing clothes. Maybe he wants her to feel important. LOL

I have spent a few days out in the water tuna and salmon fishing. I use my ocean-going boat to go out. No, I'm not nuts enough to use my Kingfisher in the ocean! My daughter and I managed to bring in approximately 500 lbs of tuna. It is rare that the tuna come in close enough for the sport fisherman to warrant going out to get them. They were as close 18 miles this year. Lynnette and I wore ourselves to a frazzel pulling in tuna after tuna. Cleaning them takes almost as much time as catching them. We got so good at cleaning that others in the fishing station were asking us for advice; which took more time! We dragged ourselves home to dump the canning job on Karen and Lynnette. I tried to catch up with web work along with snoozing in my chair. I beleive Karen and Lynnette canned 28 cases of tuna! They had to resort to using both 1/2 pint jars along with pints as everyone in town was buying the 1/2 pints. Friends brought over 12 cases from Medford. We have enough jars now for more tuna! We (well the girls) also froze up some steaks that they marinated in Teryaki and wrapped in bacon and now they only have to remove from the freezer and Barbeque. I did the smoking of several pieces. Now, it is a challenge to judge whether we like smoked tuna over smoked salmon.

Brookings is short on large salmon. We are catching 15-20 lb silvers and there seems to be plenty to catch. The water will be like a pond for the rest of the week, so Lynnette and I will catch all we can. I'm hoping for 30-40 pounders. Karen says that the smaller salmon taste better. I like to think that my limited tags will be used for largest possible! More for the buck, I guess.

I've been searching the web for the best buys in parts I need for the kayak building. I found some springs that were phased out by my former source. I actually got them for less money and will pass along the good price for my customers. I'm in search of better sources for those very small, but important parts. The component that I read about and lust for, isn't available from anyone that I can find. Karen was a sales rep for components and remembers her engineering department lying through their teeth about what was going to be available, so maybe my part is still only a thought in some engineer's mind. I wonder.

I designed a nice cart to haul the Kingfisher kayak around. We are going to the Port Townsend, WA Wooden Boat Festival Sept. 7-8-9 . I was thinking I may have to carry a 55 lb kayak further than up a levy or across a beach so I made a pretty niffty cart. We will be offering it for sale on our website soon.

If you have any questions or comments be sure to contact me at winchuckriver@charter.net or call our toll free number: 877-572-6451. If we don't answer, I'll get back to you right away.

spooked

2007-04-02T09:29:00.000-07:00

Ever spot a fish and just for the learning experience, see how close you can get before it spooks and heads off into a safe place? I have gotten to within a couple feet of some fish, and spooked others when 50 ft away. A number of things seem to come into play here. For example is how visible are you, and how threatening do you appear? Does sound contribute to the problem?

If there is a wind and there are ripples on the water, your visibility to the fish will be diminished. So when approaching a 'fishy spot', think about coming in from down wind and you will get closer without being noticed. Also note that your height will make you more visible. So keep a low profile and if possible keep the sun in front of you so your shadow doesn't give you away. Not only the shadow of yourself, but also that of the boat, and your rod as you cast to the fish.

I fish a lot out of an electric powered kayak and often use a paddle to assist while exploring for new fishing sites. Using a paddle I can reduce the power setting of the motor and almost double the range of the boat while maintaing a 3-3.5 mph cruising speed ( a bit over walking speed). In the summer the fish like to sun themselves near the surface of lakes. As I move along and I can see their swirls as they are alarmed by the approaching boat. It is surprising how quickley they become spooked when using the paddle, streaking off while still 50 feet in front of me. On the other hand, if I just let the breeze move me along and leave the paddle in its cleat, the fish will not run until the boat is just a few feet away. Part of this is because the boat is moving slower, and is not as threatening. Also if I use the motor for power, even at cruising speeds I can get much closer to the fish without the paddle. Those flashing paddle blades are like waving a flag that you are approaching and you are armed.

I have noticed the same affect on wildlife. Deer along the bank of the river are not alarmed if I do not use the paddle. The other day I came across a family of otters. Using the electric motor and moving slowly I found they were more curious about the boat than afraid of it. The younger otters swam out to get a better look at the craft and came to within 10 ft of the boat before deciding it was too big to play with. On another occasion a salt water otter swam over my way and dove swimming on his back under the boat so as to get a good look at it. He came up on the far side and looked a bit longer before swimming off. A small boat with no paddle action is not very threatening to wild life. In a past blog I describe how a couple of sea lions trashed my steelhead fishing spot, often coming to within a few feet of the boat. So you get to se a lot more if you maintain a non-threatening profile in the wild, sometimes a little more than you want.

How about noise? When fishing trout in Arkansas with my Bro, we drifted down the White river dragging a heavy chain to slow the boat. We caught lots of fish and no effort was made to be stealthy. Yet on many occasions I have spooked fish with just a tap on the hull of the boat. What is the difference here? Well I think the fish on the White have come to accept the dozens of chain dragging boats that pass every day as "normal", and non-threatening. They might even interpret the chain as the dinner bell, drawing closer to the passing boats. Perhaps it is all in what they get used to. Heavily fished waters are probably more tolerant of fishing activity than those that do not have many boats on them. So to be on the safe side, I usually move along quietly. However I have no concerns about chatting with a fishing partner in another nearby kayak. The noise level above the waterline doesn't seem to bother the fish, but it sure can be annoying to fishermen. Good fishing and paddling!

skunked and grinning

2007-02-20T12:04:00.000-08:00

The Chetco River has been hot for steelhead the last couple of days, so it is time to pitch the kayak into the truck and join the fun. I made up some special yarn rigs on #4 hooks and 8 lb flurocarbon leaders. These are stored in a PID box under the seat of the boat. Snags are a common occurance on the river as the bait is drifted along the bottom, and many rocks and logs are awaiting my passing. I use a round rubberized sinker with an eye in it to clip to a slider on the line. A swivel keeps the sinker ahead of the leader . While drifting the ball bounces over the rocky bottom with the bait drifts along below it in the current. The kingfisher kayak is electric powered and the motor on-off and left/right is controlled by the foot pedals, keeping both hands free for fishing. Only the speed is set by hand, and the throttle is located near my left knee, in easy reach.

I put in the river at Ice Box, near the first bridge as it is very convenient. I can drive the truck down the gravel bar to the water and drop in. No need to carry the boat any distance, and to shuffle gear from the truck to the boat. While loading the boat a couple of drift boats glide by and neither of them have fish on board. One boat put in at Redwood, the other at Nook, and I find myself hoping the fish are down lower or that the bite will come on later in the morning.

Shoving off at Ice Box puts the boat immediatley into a fast riffle and two tree limbs pass onerously under the boat. Toward the bottom of the riffle I cast into the seam between the fast and slow water and let the sinker go to the bottom. A few bounces along the rocky bottom are displayed on my rod tip, when the tip goes down and stays. I quickly set the hook - into a snag. A stomp on the left pedal turns the boat upstream and I slide the throttle forward to MAX. The boat quickley turns up river and in a few seconds my sinker is pushed up the line to my rod tip by the fast moving water. I grab the sinker and wind in the line as the boat moves upstream. When I'm above the snag I give the line a tug using my hand, not the rod, and the line parts at the leader. Another turn sends the boat into quiet water where I can anchor and tie on a new rig. A Snag on the first cast, not a good sign, but it did get my adrnenalin up for a while. And I lost a hook but rescued a sinker, so things could be worse. About half of the time the hook will pull out of the snag and I can just continue fishing.

Hooks are less than 50 cents and these sinkers are almost 3 bucks, so I feel ahead of the game. Occasionally the sinker will lodge under a large rock and a pull from upstream will usually free it. You can tell which is snagged (hook or sinker) by the action of the rod. I can't recall the last time I lost a stuck sinker. That is the advantage of these round bouncing sinkers, they don't wedge into a crevice like a lead sinker or even a slinky. All you have to do is get upstream of one to free it.

There is a steel head derby today so there are lots of boats on the water and we are approaching 'combat fishing' conditions. Looking upstream I see 4-5 boats most of the time and as many downstream. Most are guides with their clients and a few have fish on board. I can't help but wonder what kind of magic they employ as I am runnning the same lines on the river and using about the same bait or lure. Having 3 rods in the boat tripples their chances of having a fish, but there is more to it than that. On one boat the lady angler had caught 3 fish (releasing a small one) while the guys had none. Hmmmmmm. Wonder why.

For me the best thing about the derby was the chuck wagon the chamber of commerce set up at Loeb bar. The food was free to all of the fishermen, and the coffee chilli and hot dog put a smile on my face for the last leg of the drift. Fishermen are usually carefull about fishing ediquet but have no problem talking with a mouth full of beans. Most I talked to have been struggling to get a hook up, and the successfull ones just shrugged when asked how they did it. Just dumb luck? Hmmmm.

When we first moved up to the south coast of oregon about 7 years ago I bought a nice boat for ocean salmon fishing that had all of the goodies on it; electronics, quiet troling motor, downriggers, the whole nine yards. The first 2 week of the salmon season passed with out a single hit, even though I was fishing next to other boats that were landing fish, using the same bait, troling the same speed and depth. Driving home one afternoon I thought it was like someone had taken a dump on my bait, the fish just wouldn't touch it. I woke up the next morning with the realization that 'that is it'. I had been thawing my frozen bait out in a bucket that I had urinated in several days ago, and the residual urine was contaminating the bait. Next trip out we had a new bait bucket and a bar of anice oil soap. No one was allowed to touch the bait intil they had thoroughly washed up, and the new bucket was declared sacred, no one was to pee in it. We immediately began catching salmon and now land more than the average boat.

Incidentally, my daughter is my fishing partner. She baits and works her line, and I do mine. Fact is, I rarely manage to catch as many as she does. The boat My Mary has Mary working the bait and her husband Bob is just fishing. They catch a lot of fish. There seems to be something about the scent of ladies that salmon like, or perhaps the scent of men that salmon do not like. Anice oil, WD40 and bilge oil seems to be more attractive to a salmon than the scent of a male.

Steel head are 'sight feeders' I read, and not fussy about smell. Well maybe, but soap is cheap so now there is a bar in the kayak and I am ready for the next trip as soon as the rain lightens up and the river level begins to fall.

This trip was a bust for most anglers, I saw only two fish hooked up that morning. One boat had gone to using worms, with a big red bonber. The angler wached it intently as he drifted along not far from me. In desperation I had switched to a 'fat cat' lure and worked both sides of the boat, feeling that by covering more water I might bump into a fish. We both pulled in at the take out point with empty boats. Turns out that Mike had made his drift boat and it was indeed unique. It looked like a big pram that could hold two friendly anglers. It was the only boat with 'gingerbread trim'. We compared notes on fishing and talked of boats for a while. Then my wife rolled up with the car so I loaded the kayak up and we went back to Ice Box to pick up the truck. Driving home I could not help but feel that Mike and I had more fun on the river than most. There is something about paddling a boat that you have built that is hard to beat. Now lets see if there is something about the scent of men that makes a difference to steelhead.

clearwater steelhead

2007-02-04T21:30:00.000-08:00

It is a clear saturday and the high tide is at 12:30. If I hang around the house I am going to have a 'honey doo' list laid upon me, or the dogs are going to want to go for a run. I had better make my escape soon, so I start loading up the truck with the kayak for some quality fishing time.

This is the escape boat, just load it into the truck and remember to bring the battery, lunch and PFD.

I head up to the Chetco river just out of Brookings OR. We havent had rain for 2 weeks now and the river is flowing at only 700 CFM. It needs at least 1500 CFM to float a boat over the rocks in the upper river, so I will have to stay closer to the ocean where the tide still influences the depth. I settle on Tide Rock where there is parking for the truck and a 50 yd hike to the water, down a levee and across some gravel. Arriving at the 'put in' spot I unload the gear and lug it to the waters edge. The bank fisherman there tells me that there hasn't been any action there all morning, So I get underway and motor/paddle upstream toward Social Security Bar, where there are a couple of guides and clients in their drift boats. The first one turns out to be Val Early, one of the better guides on the river, and they have an empty boat. She says the other boat has one fish. So it is going to be 'one of those days'. The river is low and gin clear. I will have to cast long and pay attention if I am to get into a fish.

I put on a little Hot Shot and troll downstream to the riffle below Tide rock. As I move along I see a V in the water heading my way. I watch the V for a while, expecting an otter or seal nose to pop up for a breath of air, but there is none. Shortly I am next to the critter and it is a steelhead 8-10 lbs with what appears to be a wound on his side. The fish is swimming in a dazed pattern with no interest in me or anything but to continue moving along. The fish has already had a tough morning so I will not add to it.

Now in the faster water I switch to a Small corky, a little yarn and eggs in a drift rig set up. I cast long and use the motor to keep the boat parallel with the bait. The slack is kept out of the line and the rod tip bounces, describing what the sinker is doing as it moves over the gravel bottom. If a fish picks up the bait the rod tip will go down a little and not come back up, and I will have a second or two to set the hook. Dozers will not get a hook up on this day.

I make several passes on this riffle working some snaggs to see if there are fish resting behind them. With no action, I continue to drift to the next riffle below Morse Hole. It is the last riffle on the river, and below it is the estuary. Here I will have to turn around and work back upstream. I am working a drift when I hear a snort behind me and turn to see a male sea lion who is intent on fishing this riffle with me. Shortly a female appears and the two of them move up stream from me. The male is not intimidated by a boat that is smaller than he is, and the two of them work upstream while I continue working 'My fishing hole'.

Soon the water is roilled with debris created by the sealions chasing fish, and I am not getting any attention. These buggers have spooked all of the fish within half mile of me, so I decide to give it up and pull in my line. I have the line half way in when I see a large bow wave heading down toward me, and I know it isn't a fish. I crank on the reel a little faster and see the male shoot under my line. He apparently felt my line on his back, and he arced out of the water in front of me and landed with an impressive splash. The female was right behind him. They were gone, but it didn't matter, the fishing was over.

The tide was running now and the current was stronger. Using just a paddle I could barely make headway. The hull speed on a 10 ft boat with 200 lbs of guy and gear is not very fast, but with the added thrust of the motor I made good time. While paddling along I was listening of the hum of the motor and began thinking about that steelhead I had met earlier. Did it have an encounter with a seal or sea lion? I wondered if the sea lions had found it when they were upstream from me. If they did, it would have been a short chase.

In a short while I was back to Tide Rock and the take out point. I anchored the boat in a foot of water and hauled the motor, battery and gear up to the truck. Then I shouldered the boat and headed up the levee. Now I can remember days when I could have run up a hill like that with a 55 lb load, but that was a while ago. Now that I have accumulated 60++ years of life experience, it seemed wise to stop half way up and rest the old bones. After a few mins I completed the trip, secured the boat in the truck and headed home. Driving along the river I enjoyed the P-nut butter sandwich that I never had time to eat while on the water, and my thoughts returned to that steelhead.

Electric Kayak Kingfisher-10 Features

2007-01-25T08:15:00.000-08:00

A Unique Fishing Kayak- The Kingfisher-10

Kingfisher objectives:

All boats I have owned, at some time in their operation, have been too big or too small, too fast or too slow, too heavy or too light and all were too expensive. So when it comes to fishing boats, there will always be a lot of compromising going on. When thinking about the boat that became the Kingfisher, I set out the following goals bearing in mind that this was to be a fresh water boat operated by a single fisherman on both lakes and rivers that are not exposed to high wind conditions (over 30 mph). They are roughly listed in the order of their importance.

1. Hands free operation-Any boat can be viewed as a hands free boat as long as it is tied to a fixed point, or at anchor. Under these circumstances the boat is not in operation, and it doesn’t offer the fisherman access to any part of the water he cannot cast to. Our view of hands free operation is that the boat must be operating under control of the fisherman without the use of his hands. He must be able to compensate for changing wind and current without picking up a paddle, or to hold the boat in any desirable part of a river and have both hands free to fish. He can move along a shore line and cast to structure most likely to hold fish. He can drift down a river maintaining his line of drift while having both hands free to fish. He must be able to fight and control a large fish without the need to paddle or anchor.

2. Dry boat, adequate storage. The boat must offer a dry environment as it will often be used in colder climates where ‘wet butt’ boating is not an option. It is essential to keep equipment and supplies in good condition, possibly without the use of dry bags. Access to tackle, bait and nets should be at hands reach and without having to untie the desired item.

3. Entry and exit of the boat while on the water- In many fishing environments the operator must enter/exit the boat in shallow water. For example when launching in lakes and streams without launch facilities. Here the boat is loaded while in the water and entry/exit is required. Another common event is when the boat is entering shallow water and it is necessary to walk the boat to deeper water. Finally, landing a large fish in a river often requires the fish to be worked to shallow water and then landed on the beach. The boat is anchored near the shore and the fisherman steps out to beach the tiring fish. The boat must be easy to anchor and secure, preferably with one hand and stable enough that getting in or out is not difficult.

4. Adequate anchor mechanism. Typical kayak anchoring systems consist of a lateral line along one side of the hull, with a clipped on anchor line to secure the boat. Anchors weigh 1-3 lbs. The clipped on anchor is dropped and the clip moved to the bow or stern of the boat, usually a two hand operation. This works well in still water with little wind.
In a river or stream it is necessary to anchor in faster moving water requiring anchors of up to 10 lbs to hold the boat securely. The anchor line is usually 1/4 inch and it is desirable that it be routed thru a pulley at the bow or stern, with a jamb cleat near the seat to secure the line. When not in use the anchor is pulled up to the pulley and cleated off. It is helpful if the anchor can be quickly deployed using only one hand. Also it is very important the boat is stable when anchored in the current. Some boats will swing wildly on the anchor rope, to the point of overturning.

5. Good speed and paddling range. Paddle boats are not seen as fast boats. They only have a ¼ hp drive system (you and me) and at maximum speed it tires quickly. Still there is a need to be able to move upstream thru a riffle to make a second pass at a section of a river we believe holds fish, or work several miles of promising shore line. And then there is the paddle home at the end of the day. Cruising speed should be 3-4 mph and grunt speed 4-5 mph. Note that every time you double the speed of the boat, the motor will consume 4-6 times as much energy. So getting in a hurry uses up battery capacity rapidly.

6. Shallow water operation. When fishing rivers, or on a lake when the wind is blowing, you will find yourself entering shallow water unexpectedly. Your immediate need is to reduce the draft of the boat, by pulling up the propulsion unit (if used) getting hardware out of the water and perhaps deploying the anchor so you can further sort the problem out. If the boat should hit bottom it should not result in damage. Once the situation is clear, you might want to paddle to deeper water, or possibly walk, towing the boat behind. Fishing shallow water often means dealing with weeds and snags. If the boat is powered it will be necessary to clear the prop of weeds. Having the ability to lift the motor out of the water and spin the prop both forward and backward makes this a much easier task.

7. One man deployment. It is very desirable for the boat to be light enough that it can be taken to the launch site and deployed without assistance. It should fit in the back of a puck-up, SUV or at least be suitable to be car-topped to the launch site. This eliminates a trailer and storage facility when the boat is not in use. The boat described above can be hung from a garage ceiling using a few simple pulleys and some rope. It takes no floor space and stays clean and dry when the weather turns wet and cold.

8. Lack of Clutter. It has often been observed that a fisherman can get his hook into anything that is not stowed below decks, and even those items are not safe. Lines, bags, clothing and lunch are all candidates. Getting a hook out of a dock line while in a fast river is a very frustrating task, and keeping your line out of the rigging when you have a large fish on is equally important. The best view over the bow of your boat is one with no lines or hardware in sight. Then if you can keep the boat pointed at the fish, you have a good chance of landing that big one.

9. Simple operation. The operation of the boat should be as natural as walking and require little thought or training. Kind of like riding a bicycle, not natural at first, but soon it seems perfectly normal. All needed control functions should be easily at hand and the boat should provide feedback so the fisherman can see his status at a glance.

10. Backing down. Most kayaks are not designed to be operated in reverse, indeed some of the pedal craft have no reverse and a paddle is required. One of the more popular steelhead and salmon fishing techniques is called ‘Back Trolling’. The boat is facing down stream, and a lure or bait is let out from the boat and slowly moves down the river into a likely hole. The motor is running in reverse slowing the boats drift and adding action to the bait or lure. This puts the bait ‘in the fishes face’ and it often produces results when nothing else will.
I also often find bass in out of the way places that are tight to get in and out of. Hooking a fish there requires backing the boat out to open water to deal with the fish, and turning around is not an option.

This kind of fishing requires that the boat handles well in reverse. The shape of the bottom must allow reasonable speed in reverse and fast response to steering inputs. This usually means building some ‘rocker’ into the bottom, resulting in a slower boat with less cargo capacity. More compromises.

11. Places to put things. The boat owner will want to add items to the boat to make it a more effective fishing platform. Fish finders, GPS and tie points for lanyards to secure the paddle and net are but a few. Flat surfaces are much more amenable to these activities than are irregular rounded surfaces. A dash like surface at the front and rear of the cockpit is helpful to hold status indicators and perhaps small electronic equipment. It is helpful if these added items do not become part of the clutter on the forward deck where much of the fishing activity takes place.

I believe the KF 10 meets all of the above objectives. I have fished from one for years now and made changes as necessary to accomplish these objectives. I believe you will find it is a uniquely capable fishing kayak. It is available as a kit with many precut and some pre-assembled parts, making your construction job faster and less prone to error.

Go to our website <

www.winchuckriverstore.com> to keep updated as to what we are offering. It is taking time to actually put together the information to show exactly what each kayak building kit includes. It will be posted very soon.